Standing stag 2 - wooden craft blank - 2mm MDF
Standing stag 2 - wooden craft blank - 2mm MDF
Sizes available
Sizes available
Our standard sizes are :
• 6cm W x 6cm H (60mm W x 60mm H)
• 8cm W x 8cm H (80mm W x 80mm H)
• 10cm W x 10cm H (100mm W x 100mm H)
• 12cm W x 12cm H (120mm W x 120mm H)
• 15cm W x 15cm H (150mm W x 150mm H)
• 20cm W x 20cm H (200mm W x 200mm H)
• 25cm W x 25cm H (250mm W x 250mm H)
• 30cm W x 30cm H (300mm W x 300mm H)
• 40cm W x 40cm H (400mm W x 400mm H)
Wood Type
Wood Type
2mm MDF
This is the thinnest in our range of shapes. Its light and thin so could be used for projects where this is important to the crafter. It has the advantage of a smooth finish and offers very good value for money. Normally a darker in colour than the 3mm MDF. We use lasers to cut our shapes and this process will leave a light brown edge and occasionally it may also leave a few small flash/scorch marks behind on the surface. However these can easily painted over or can be removed using sand paper.
Hole options and sizes
Hole options and sizes
You can add the following hole options to these shapes.
• No hole
• With hole
The approximate sizes of the holes are as follows
1cm to 3.5cm = 1mm to 2mm hole diameter
4cm to 9.5cm = 3mm to 3.5mm hole diameter
10cm to 14.5cm = 3.5mm to 4mm hole diameter
15cm to 20cm = 4.5mm to 5mm hole diameter
20cm+ = 5.5mm to 6.5mm hole diameter
Quantities and discount
Quantities and discount
Our standard pack sizes are listed below and discounts are added to each of the pack sizes. This means the larger the pack size the better the discount. For example a pack of 25 pack is better value than the 5 pack.
If you would like a quantity not listed please use a variation of the the quantities that are to get close to the amount you would like. For example, if you needed 30 please order a pack 25 plus a pack of 5
• 6cm are available in packs of 5,10,25,50,75,100,250,500,1000
• 8cm are available in packs of 5,10,25,50,75,100,250,500,1000
• 10cm are available in packs of 5,10,25,50,75,100,250,500,1000
• 12cm are available in packs of 5,10,25,50,75,100,250,500,1000
• 15cm are available in packs of 5,10,25,50,75,100,250,500,1000
• 20cm are available in packs of 5,10,25,50,75,100,250,500
• 25cm are available in packs of 5,10,25,50,75,100,250
• 30cm are available in packs of 1,3,5,10,25,50,75,100
• 40cm are available in packs of 1,3,5,10,25,50
Other quantities are available but please contact us for a postage quote
Get crafty with our 2mm thick MDF Standing stag 2 wooden cut-out. Each cut-out is laser cut for precision, you can choose from lots of pack quantities and available in multiple sizes too. Perfect for all your art and craft needs. Our Standing stag 2 wooden blank is a must for any crafting cupboard.
Please see tabs for more information on sizes, wood type and hole options